TEC Electric 37kW 3ph 2 Pole High Efficiency Foot and Flange Mounting (B35) 200L Frame AC Motor for 400V 3 phase supply. Inverter Rated for use with a Variable Frequency Inverter Drive or a fixed frequency mains supply at 50Hz.
Fixed mains supply output: 37kW (50HP) x 2950RPM at 400V x 50Hz 3ph.
Inverter Supply Output: 14:1 Speed Control range from 295RPM to 4130RPM for 5Hz to 70Hz control, with suitable de-rating at the lower speeds.
Current: 64.1A full load at 400V.
Power Factor: 0.9 when mains connected at 50Hz.
Efficiency: 92.5%.
Dimensions: 390mm Wide x 745mm Long x 460mm high overall.
Enclosure Rating: IP55.
Mounting: Foot mount on 19mm holes at 318mm wide x 305mm centres 133mm back from the shaft shoulder and Flange mount on 19mm holes at 350mm PCD with 300mm diameter spigot in the 400mm diameter flange.
Shaft: 55mm dia x 110mm with 16mm wide key.
Weight: 153kg.
Ambient Temperature: Rated at 40C.
Ventilation space required at rear cooling air intake.
Thermistors inclouded for use with external over-temperature protection device.
Part Number: TECA2-200L2-2-B35
For Variable Speed use:-
Part Time Output when Inverter powered:-
85.56Nm, 37kW (50HP) x 4130RPM at 70Hz.
120Nm, 37kW (50HP) x 2950RPM at 50Hz.
120Nm, 18.5kW (25HP) x 1475RPM at 25Hz.
120Nm, 3.7kW (5HP) x 295RPM at 5Hz.
Continuous Output when Inverter powered:-
85.6Nm, 37kW (50HP) x 4130RPM at 70Hz.
120Nm, 37kW (50HP) x 2950RPM at 50Hz.
102Nm, 15.73kW (21HP) x 1475RPM at 25Hz.
60Nm, 1.85kW (2.5HP) x 295RPM at 5Hz.
Download the Manual and Dimension Drawings from the links below:-
From Jan 1st 2017, three phase electric induction motors with a rated output of 0.75kW to 375kW and efficiency less than IE3 must be equipped with a variable speed drive (Inverter Drive). For exceptions, see EC Commission Regulation 640/2009.