TEC Electric - 5.5kW 3ph 4 Pole Foot/Flange Mounting (B35) 112L Frame AC Motor for 400V 3 phase supply. Inverter Rated for use with a Variable Frequency Inverter Drive or a fixed frequency mains supply at 50Hz.
Fixed mains supply output: 5.5kW (7.5HP) x 1440RPM at 400V x 50Hz 3ph.
Inverter Supply Output: 14:1 Speed Control range from 144RPM to 2016RPM for 5Hz to 70Hz control, with suitable de-rating at the lower speeds.
Full Load Current - 11.2A at 400V.
Power Factor is 0.83 when mains connected at 50Hz.
Efficiency is 85.7%
250mm Wide x 405mm Long x 300mm high overall in its IP55 enclosure.
Foot mount on 12mm holes at 190mm wide x 140mm centres 70mm back from the shaft shoulder.
Flange mount on 15mm holes at 215mm PCD with 180mm diameter spigot in the 250mm diameter flange
Shaft is 28mm dia x 60mm with 8mm wide key.
Weight is 40kg (approx.)
Rated at 40C Ambient.
Ventilation space required at rear cooling air intake.
Thermistor for over-temperature protection.
Manufacturer Part Number is 5.543TECAB35-112-S2 or PA112L-4-TECA.
For Variable Speed use:-
Part Time Output when Inverter powered is...
18.25Nm - 5.5kW ( 7.37HP) x 2880 RPM at 100 Hz
36.5Nm - 5.5kW ( 7.37HP) x 1440 RPM at 50 Hz
36.5Nm -2.75kW ( 3.68HP) x 72 RPM at 25 Hz
36.5Nm - 0.55kW (0.74HP) x 144 RPM at 5 Hz
Continuous Output when Inverter powered is...
26Nm -5.5kW ( 7.37HP) x 2016 RPM at 70 Hz
36.5Nm -5.5kW ( 7.37HP) x 1440 RPM at 50 Hz
31Nm - 2.34kW ( 3.13HP) x 720 RPM at 25 Hz
18.3Nm - 0.28kW (0.37HP) x 144 RPM at 5 Hz
Download the Drawing and Datasheet from the link below:-
From Jan 1st 2017, three phase electric induction motors with a rated output of 0.75kW to 375kW and efficiency less than IE3 must be equipped with a variable speed drive (Inverter Drive). For exceptions, see EC Commission Regulation 640/2009.