TEC 110kW 3ph 4 Pole high Efficiency IE4 AC Motor in 315 frame for 400V 3 phase supply.
Totally enclosed to IP55.
Includes shaft mounted cooling fan.
****When run with an inverter an insulated bearing should be fitted on the NDE**** Please select option linked below
Fixed Supply Output: 110kW (150HP).
Speed: 1485RPM.
Voltage: 400V/690V @ 50Hz 3ph.
Full Load Current: 185.25A at 400V.
Full Load Current: 107.39A at 690V.
Rated Torque: 707.70 Nm
Overload: 150% x 60seconds.
Efficiency: 96.3% at full load, 96.3% at 75% load and 95.9% at 50% load.
Efficiency Class: IE4.
Power Factor: 0.89 when mains connected at 50Hz.
Set terminal box links 'three a-breast' for 400V 'Delta' connection.
Set terminal box links ‘two at one side’ for 690V 'Star' connection.
Dimensions: 682mm Wide x 1235mm Long x 825mm high overall.
Terminal Box: Top
Cable Glands: 2-M63*1.5
Enclosure Rating: IP55.
Foot mount on 27mm holes at 508mm wide x 406mm centres 216mm back from shaft shoulder.
Bearings DE (NU319), NDE (6317C3) NDE Bearing must be changed to an insulated bearing when used with an AC Inverter (See linked items below for alternative insulated bearing)
Weight: 883kg.
Ambient Temperature: Rated at -20C to 40C.
Ventilation space required at rear cooling air intake.
Thermistors included for use with external over-temperature protection device.(3 PTC)
Part Number: 110.043TECCB3-IE4, (110.043TECCB3-IE4 and T4C 315S-4).
Download the full Technical Catalogue from the link below...
From Jan 1st 2017, three phase electric induction motors with a rated output of 0.75kW to 375kW and efficiency less than IE3 must be equipped with a variable speed drive (Inverter Drive). For exceptions, see EC Commission Regulation 640/2009.