Brook Crompton Series 10 IE1 0.37kW (1/2HP) three phase 4 pole B35 Foot and Flange mounting 71 frame AC Induction Motor for 230V or 400V 3 phase supply. Suitable for use with a Variable Frequency Inverter Drive having 1ph or 3ph input and 3ph output, or a fixed frequency three phase mains supply at 50Hz.
Output: 370W (0.5HP) x 1330rpm at 230V or 400V x 50Hz 3ph.
Speed Range from an Inverter Supply: 27:1 Range from 133rpm to 3600rpm for 5Hz to 135Hz, when de-rated at the lower speeds.
Constant Power Speed Range: 1330rpm to 3600rpm continuously. The manufacturer recommends Silicon shaft seals and forced ventilation for applications at the higher end of this range.
Full Load Current with links in Δ (Delta) for 230V 3ph: 1.85A.
Full Load Current with links in Y (Star) for 400V 3ph: 1.06A.
Torque: 2.66Nm at 50Hz.
Efficiency: 67.00% (IE1) (A more efficient motor is available, see the linked products below)
Power Factor: 0.75 when mains connected at 50Hz.
Terminal box cable entry: Includes 1 x M20 Gland.
Terminal box position: Top, sides.
Enclosure rating: IP55.
Dimensions: 160mm wide x 245mm long x 192mm high overall.
Mounting: Foot mount on 7mm holes at 112mm wide x 90mm centres 45mm back from the shaft shoulder.
Flange mount on 4 x 10mm holes equispaced on 130mm PCD with 110mm diameter spigot in the 160mm diameter flange.
Shaft: 14mm diameter, 30mm long with 5mm key.
Construction: Aluminium
Weight: 6.30kg.
Ambient Temperature: Rated to 40°C.
Ventilation space is required at rear cooling air intake.
Over-Temperature Detection: included.
Part number: B-DA71MB-H 4P B35.
Download the Technical Catalogue from the link below:-