Brook Crompton Series 10 IE1 0.09kW (1/8HP) three phase 4 pole B34 Foot and Face mounting 56 frame AC Induction Motor for 230V or 400V 3 phase supply. Suitable for use with a Variable Frequency Inverter Drive having 1ph or 3ph input and 3ph output, or a fixed frequency three phase mains supply at 50Hz.
Output: 90W (0.12HP) x 1325rpm at 230V or 400V x 50Hz 3ph.
Speed Range from an Inverter Supply: 27:1 Range from 132.5rpm to 3600rpm for 5Hz to 136Hz, when de-rated at the lower speeds.
Constant Power Speed Range: 1325rpm to 3600rpm continuously. The manufacturer recommends Silicon shaft seals and forced ventilation for applications at the higher end of this range.
Full Load Current with links in Δ (Delta) for 230V 3ph: 0.64A.
Full Load Current with links in Y (Star) for 400V 3ph: 0.37A.
Torque: 0.65Nm at 50Hz.
Efficiency: 58.00% (IE1)
Power Factor: 0.61 when mains connected at 50Hz.
Terminal box cable entry: Includes 1 x M20 Gland.
Terminal box position: Top, sides.
Enclosure rating: IP55.
Dimensions: 113mm wide x 199mm long x 153mm high overall.
Mounting: Foot mount on 5.8mm holes at 90mm wide x 71mm centres 36mm back from the shaft shoulder.
Face mount on 4 x M5 tapped holes at 65mm PCD with 50mm diameter register in the 80mm diameter flange.
Shaft: 9mm diameter, 20mm long with 3mm key.
Construction: Aluminium
Weight: 3.90kg.
Ambient Temperature: Rated to 40°C.
Ventilation space is required at rear cooling air intake.
Over-Temperature Detection: not included.
Part number: B-DA56MB-H 4P B34.
Download the Technical Catalogue from the link below:-