TEC - 5.5kW (7.5HP) 112M 230V 3ph 2 Pole - Flange Mounting (B5) AC Motor for Speed Control

5.523TECAB5-112-230V

Order Code: 27352
Obsolete Product
This item is now obsolete. Alternatives may be available - see linked products below.

Brand: TEC Electric Motors, Range: TECA Three Phase Aluminium

Tec 112 Frame - 5.5kW IE1 3ph 2 Pole AC Motor for 230V 3 phase supply. Use with 230V Variable Frequency Drives or a fixed frequency mains supply at 50Hz.

Can be used over a 10:1 Speed Control range from 290RPM to 2880RPM, with suitable de-rating at the lower speeds.

Fixed mains supply output is 5.5kW (7.5HP) x 2880RPM at 230V x 50Hz 3ph.

Full Load Current - 18.2A at 230V.
Overload - 150% x 60seconds.
Power Factor is 0.88 when mains connected at 50Hz.

220mm Wide x 395mm Long x 292mm high overall in its IP55 enclosure.
Flange mount on 4 x 15mm holes at 215mm PCD with 180mm(4.0mm deep) diameter spigot in 250mm diameter flange.
Shaft is 28mm dia x 60mm long.
Key 8mm x 22mm length
Shaft side load is 125kg for 20,000hrs life
Weight is 30kg.

Rated at 40C Ambient.
Ventilation space required at rear cooling air intake.

Full part number is - 5.523TECAB5-112-230V

Download the tec Motor details and drawing from the link below...

From Jan 1st 2017, three phase electric induction motors with a rated output of 0.75kW to 375kW and efficiency less than IE3 must be equipped with a variable speed drive (Inverter Drive). For exceptions, see EC Commission Regulation 640/2009.