TEC Electric 1.1kW 3ph 4 Pole Premium Efficiency (IE3) Foot Mounting (B3) 90S Frame AC Motor for 230V or 400V 3 phase supply. Inverter Rated for use with a Variable Frequency Inverter Drive having 1ph or 3ph input and 3ph output, or a fixed frequency mains supply at 50Hz.
Fitted with encoder and 400V 3 phase force vent fan.
Fixed mains supply output: 1.1kW (1.5HP) x 1440RPM at 230V or 400V x 50Hz 3ph.
Inverter Supply Output: 14:1 Speed Control range from 144RPM to 2016RPM for 5Hz to 70Hz control, with suitable de-rating at the lower speeds.
Full Load Current: 4.48A at 230V(DELTA) or 2.59A at 400V (STAR)
Power Factor: 0.73 when mains connected at 50Hz.
Efficiency: 84.1% at full load.
Full Load Torque: 7.29Nm
175mm Wide x 333mm Long x 229mm high overall in its IP55 enclosure.
Foot mount on 10mm holes at 140mm wide x 100mm centres 56mm back from the shaft shoulder.
Shaft is 24mm dia x 50mm with 8mm wide key.
Weight is 15.1kg.
Encoder type is: IH580-14PZR63-02048.
Rated at 40°C Ambient.
Ventilation space required at rear cooling air intake.
Thermistor for over-temperature protection.
Manufacturer Part Number is 1.143TECAB3-IE3-ENC-FVU.
Extended Warranty Available: When a TEC AC Motor is used with a TECDrive AC Inverter (see linked products below) the warranty period is 2 years (from dispatch). Standard warranty is 1 year.
For the extended warranty to be valid the TEC AC Inverter and TEC Motor must be on the same order and used together when on site.
From Jan 1st 2017, three phase electric induction motors with a rated output of 0.75kW to 375kW and efficiency less than IE3 must be equipped with a variable speed drive (Inverter Drive). For exceptions, see EC Commission Regulation 640/2009.