TEC Electric - 1.5kW 3ph 4 Pole High Efficiency Flange Mounting (B5) 90L Frame AC Vector Motor for 230V or 400V 3 phase supply. Inverter Rated for use with a Variable Frequency Inverter Drive having 1ph or 3ph input and 3ph output, or a fixed frequency mains supply at 50Hz.. Complete with axial force cooling fan (requiring separate 400V supply) and 2048ppr encoder fitted inside extended rear cowl. Frame size TECA2-90L-4-B5-FV-ENC
Fixed mains supply output: 1.5kW (2HP) x 1420RPM at 230V or 400V x 50Hz 3ph.
Inverter Supply Use: 15:1 Speed Control range - 144RPM to 2160RPM for 5Hz to 75Hz, with suitable de-rating at the lower speeds. Very Low Speed, down to 1Hz are possible with correct setting of the 'Boost' parameter (see the 'How To' Blog above).
Full Load Current - 5.73A at 230V, or 3.31A at 400V.
Power Factor is 0.79 when mains connected at 50Hz.
Efficiency is 82.8%
Forced Ventilation Fan: Single Phase 230/50Hz (0.14A 20W) Note: 3 Phase 230/400V/50HZ option avaiable on request
175mm Wide x 427mm Long (approx) x 229mm high overall in its IP55 enclosure.
Flange mount on 12mm holes at 165mm PCD with 130mm diameter spigot in the 200mm diameter flange.
Shaft is 24mm dia x 50mm with 8mm wide key.
Weight is 20kg.
Rated at 40C Ambient.
Ventilation space required at rear cooling air intake.
Thermistor for over-temperature protection.
Part number is - 1.543TECAB5-FORCEVENT-90A230/1/50-ENC
Download the full Manual and Dimensions from the links below:-
From Jan 1st 2017, three phase electric induction motors with a rated output of 0.75kW to 375kW and efficiency less than IE3 must be equipped with a variable speed drive (Inverter Drive). For exceptions, see EC Commission Regulation 640/2009.