Vascat - 0/241/241kW x 0/1920/4000RPM – Square Frame AC Vector Motor, foot mounting (B3) for 400V 3 phase supply.
200P Frame, Force Ventilated (IC06) to IP23.
Force cooling fan, intake filter: NOT SUPPLIED
Encoder not fitted or provision for.
Use with Closed Loop AC Vector Drives having the encoder board option fitted for full closed loop vector control, when an encoder is fitted.
Highlighted differences from ED10 motor specification, please view ED12 datasheet below.
Continuous Output: 241kW.
Overload: 150% to S6 (40%), subject to reduced maximum speed.
Base Speed: 1920RPM.
Maximum Speed at Full Output: 4000RPM.
Torque to Base Speed: 1200Nm.
Torque at Maximum Speed: 576Nm.
Full Load Current: 448.3A.
Voltage: 400V 3 Phase.
Supply Frequency: 97/202Hz at Base/Maximum Speed.
Magnetising Current: 212.2A.
Balancing degree: A
Overall Dimensions: 430mm Wide x 1054mm Long x 522mm high overall.
Mounting: Foot mount on 19mm holes at 318mm wide x 658mm centres.
Terminal box drive DE top, 4 gland plates.
Weight: 667kg.
Rotor Inertia: 1.324kgm2.
Shaft: 75mm diameter x 140mm from shoulder with 20mm wide keyway.
Drive End Bearing: Ball Bearing for a direct connected load. 6136 ZZ C3 and 6312 ZZ C3 (DE & NDE respectively)
Bearing Protection: Fittted with 2 off Bearing Current bypass brush DE and NDE suitable for speeds up to 3500RPM fitted to DE as Standard
Ambient Temperature: 40C at up to 1000m above sea level.
Cooling: Force Ventilation Fan with Intake Filter NOT SUPPLIED
Part number: MAC-QI-200P-F62-B3-2186. (MACQI200P-F62-B3)
Download the MAC-QI-200P-F62-ED12 Dimension drawing and output curves from the link below...