Marelli 112 Frame - 1.5kW 3ph 8 Pole Flange Mounting AC Motor for 230V and 400V 3 phase supply. Use with Variable Frequency Drives having 1ph or 3ph input and 3ph output or a fixed frequency mains supply at 50Hz.
Fixed mains supply output is 1.5kW (2HP) x 710RPM at 230V or 400V x 50Hz 3ph.
Full Load Current - 7.5A at 230V, or 4.3A at 400V.
Overload - 150% x 60seconds.
Power Factor is 0.68 when mains connected at 50Hz.
Set terminal box links 'three a-breast' for 230V 'Delta' connection.
Set terminal box links 'two at one side' for 400V 'Star' connection.
Encoder included is 2048ppr x 12 to 30V (type IH580-1400-R63/2048)
224mm Wide x xxxmm Long x 292mm high overall in its IP55 enclosure.
Flange mount on 14mm holes at 215mm pcd in 250mm diameter flange with 180mm spigot.
Shaft is 28mm dia x 60mm with 8mm wide key.
Shaft side load is 150kg for 20,000hrs life (6306-2Z bearing)
Weight is 26.6kg.
Rotor inertia is 0.017kgm2
Rated at 40C Ambient.
Ventilation space required at rear cooling air intake.
Full part number is - MAA112M8-B5-Enc (MAA 112 M8 B5 Enc)
For Variable Speed use:-
Part Time Output when Inverter powered is...
10.1Nm - 1.5kW (2HP) x 1420RPM at 100Hz
20.1Nm - 1.5kW (2HP) x 710RPM at 50Hz
20.1Nm - 0.75kW (1HP) x 355RPM at 25Hz
20.1Nm - 0.15kW (0.2HP) x 71RPM at 5Hz
20.1Nm - 0.015kW (0.02HP) x 7RPM at 0.5Hz
Continuous Output when Inverter powered is...
10.1Nm - 1.5kW (2HP) x 1420RPM at 100Hz
20.1Nm - 1.5kW (2HP) x 710RPM at 50Hz
17.1Nm - 0.63kW (85HP) x 355RPM at 25Hz
10.1Nm - 0.075kW (0.1HP) x 71RPM at 5Hz
10.1Nm - 0.0075kW (0.01HP) x 7RPM at 0.5Hz
Download the technical catalogue with dimensions from the link below:-