Vascat 0/67.6/26kW x 0/4159/10000RPM Square Frame AC Vector Motor, foot and flange mounting (B35) for 360V 3 phase Inverter Drive supply.
132 Frame, Force Ventilated (IC06) to IP23.
Includes force cooling fan, intake filter, high speed bearings and EnDat Encoder fitted.
Use with a Closed Loop AC Vector Inverter Drive having the encoder board option fitted for full closed loop vector control and a switching frequency not less than 6.5kHz.
Continuous Output: 67.6kW.
Overload: 145% to S6 (40%), subject to reduced load at the higher speeds.
Base Speed: 2936RPM.
Maximum Speed at Full Output: 6450RPM (67.6kW).
Maximum Speed at reduced Output: 10,000RPM (26kW).
Torque to Base Speed: 220Nm.
Torque at Maximum Speed: 24.8Nm.
Full Load Current: 144A.
Voltage: 360V 3 Phase.
Supply Frequency: 99/337Hz at Base/Maximum Speed.
Magnetising Current: 65A.
Dimensions: 328mm Wide x 734mm Long x 650mm high overall.
Mounting: Foot mount on 18mm holes at 216mm wide x 355mm centres, or Flange mount on 18mm holes at 300mm PCD with 250mm diameter register.
Weight: 155kg.
Rotor Inertia: 0.091kgm2.
Shaft: 48mm diameter x 110mm from shoulder without keyway.
Balancing: To Class 'A' for use up to 10,000RPM
Drive End Bearing: High Speed Bearing for a direct connected load.
Bearing Protection: High speed shaft grounding ring.
Encoder: ROC413 2048 5V 1Vpp EnDat fitted.
Terminal Box: Mounted feft side at NDE.
Over-Temperature Protection: via PTC140 and PT100 sensors for use with external protection device (not included).
Cooling Fan: Mounted on top at NDE for 400V x 50Hz supply at 0.1.9A.
Ambient Temperature: 40C at up to 1000m above sea level.
Part number: MAC HS4 132P 142 IP23 B5 OV20000430.
Download the MAC-HS4-132P Dimension drawing and output curves from the link below...