ABB - 0/201.8/201.8kW x 0/1500/1775RPM - AC Vector Motor for 400V 3 phase supply.
200 Frame, Force Ventilated (IC06) to IP23.
Includes force cooling fan and Stegman 1024ppr x 15V Encoder and Matrix Holding Brake and special arrangement of fan and terminal box on top.
Use with 690P Closed Loop AC Vector Drives having the encoder board option fitted or other full closed loop Vector Inverter.
Continuous Output from Vector Inverter supply is...
0/201.8/201.8kW x 0/1500/1775RPM at 0/50.8/60.1Hz
for maximum 362.4A x 400V
S6 (40%) Output is...
0/282.5/282.5kW x 0/1500/1930RPM at 0/50.8/65.4Hz
for maximum 507.4A x 400V
S6 Duty is 4 minutes at maximum current every 10 minutes (6 minutes off).
(690P drive is 150% x 60 seconds, unless oversized)
Maximum speed is 5000RPM, at reduced rating.
Use over 1000:1 speed turn-down with full torque at zero speed in continuous and part time operation.
Encoder is VFS60 as equavalent and a direct replacement for the Stegman DGS66-HAZ-S02 at 15V x 1024ppr in quadrature with complements.
Holding duty Brake is Intorque BFK458-25N as equavalent and a direct replacement for Matrix 400Nm with micro switch.
Shaft is special dimensions at 70mm diameter x 170 long with keyway cut through to shaft end (optional blind keyway on request).
Terminal box is mounted on top.
Thermistor x 3 for external over-temperature protection system.
Weight is 629kg
Rotor Inertia is 1.34kgm2
Shaft is a Special dimension 70mm diameter x 170mm from shoulder with 20mm wide keyway cut through to shaft end (shoulder is 133mm from the front fixings) option is available for a 'Nested' keyway on request.
Roller bearing included at the drive end for belt side load.
550mm Wide x 975mm Long.
Foot and/or Flange mount on xxmm holes at 318mm wide x 686mm centres, flange is 8 x 18.5mm holes on 400mm pcd with 350mm spigot.
Rated at 40C Ambient.
Force ventilation fan fitted on top at 11.2/6.5A flc x 230/400V 50Hz 3ph (60hz on request).
Part number is - VR52R00G42112A000
Download the Manual, Brochure and Handbook from the links below...
Full Explation of the motor code is...
V = Ventilated to IP23
R = Type H200
5 = Stator Lengh for 201.8kW output
2 = Speed at 1500 rpm for 400V
R = Terminal Box on top (Fan has extension for mounting on top also)
0 = Mounting B3, B5 and B35
0G = With encoder HTL 1024 type Sick VFS60
4 = Holding Brake rated 400Nm as Intorque 1EB070-26 24V with Micro Switch fitted
2 = With Keyway and no oil seal (Keyway is cut throught to shaft end, nested key by special request)
1 = Roller Bearing fitted for belt side load
1 = Special Shaft Dimension
2 = Thermal Protection by 3 x PTC
A = Supply Voltage at 400V
0 = Painted Black to RAL 9001
00 = No accessories fitted