10 x 38mm Size High Speed AC Fuse Holder IP20 and Power Circuit off-Load Isolator with Neutral link (Without indicator) for DIN rail mounting. (Neutral Link is supplied - see photo)
MODULOSTAR®CMC10 fuse-holders for cylindrical fuse-links class 10x38mm
All circuits up to 690V for protection of motors, transformers,
low voltage distribution, control circuits, drive protection, Modular design.
Takes Barrel type fuses in 10 x 38mm size
Nominal Voltage Ui AC/DC 690V AC (AC20B)
Voltage Isolation imp 6kV @ 690V AC/DC
Ith = 32A, Ie < / = 32A
Max. fuse power loss = 3W
Utilization category: AC20B/DC20B
32A Maximum rating
IR for Fuses : 200kA @ 500V-80kA @ 690V.
Max Power loss per link 3W
Derate above ambient of 40°C
Recommended fuses
10.3x38.1 aM, gG fuse-links with and w/o striker
10.3x38.1 gR fuse-links w/o striker
10.3x38.1 HP6M fuse-links
Connection: Max. tightening torque: 2Nm (17.7lbs.-in) Rigid / Stranded wire = 1-16mm² (16-6AWG) Max. 2x6mm² PZ2 or flat 5.5x1mm screw drivers recommended (max. diameter 6mm)
Use PZ2 or Flat Bladed Screwdriver 5.5 x 1mm (Max Tightening Torque 2.2Nm, 19Ibs.-in)
Vibration: Withstand on the 3 main axis*: Sinusoidal vibration testing according to IEC 60068-2-6 2 to 13Hz x= 1 mm peak 13 to 100Hz y= 0.7g peak according to french marine application Random vibration testing according to IEC 61373 Category 1 Class B
Shock: Shock testing according to IEC 61373 Category 1 Class B Shock testing according to IEC 60068-2-27 15g/11ms/18 shocks
IEC 60269-2 and IEC 60947-3Compliance
RoHS Compliant
Plastic material: NF 16101 & 16102
Requirement 2 Compliant
Shock and vibration tested for marine and railway applications.
76.5 mm high x 76.9mm open(56.5mm closed) x 34.9mm wide
Manufacturer is Mersen, previously sold under the Ferraz Shawmut brand.
Manufacturers part number: Part NUmber is CMC101N (G1062698)