Santerno DCREG2 40kW 100A 2Q 200V to 500V 3ph AC to DC Converter

Santerno DCREG2 Series - 100A 2 Quadrant DC Thyristor Drive for 200-500V.
Typical Motor output - up to 40kW (53.3HP) at 440V DC for motor speed and torque control.

Simple to set-up in Digital, fully-isolated 2 Quadrant form and ready to run from its 'Quick Set-Up' settings.
Frame Size 1 - 214mm Long x 264mm Deep x 440mm High.
Weight: 15kg.

Terminals include:-
3 x Analogue Inputs (1 differential Input).
1 x Analogue Outputs (3 x Programmable).
6 x Digital Inputs – 2 Selectable as Encoder Quadrature Inputs.
1 x Digital Output
5 x Relay Outputs.
Internal Armature Voltage AVF (ARM) Feedback, Tacho and Encoder (3 wire quadrature) included as standard.
Include Keypad.

Input Current - 100A for Armature + up to 15A for Field.
Input Voltage – 200V to 440V three phase +-10% at 50/60Hz.
Input fuse – 100A - to suit input bridge at 5000A²s
Note. The 3 phase Field and Armature supplies are input through separate terminals and may be at different levels if desired.
A line rector is required on the 3 phase input.
Overload: 150% for 1 minute every 10 minutes.

Rated at 40°C Ambient.
Ventilation space above - 100mm.
Ventilation space below - 100mm.
Ventilation space at sides - 0mm.
Heat Loss at max output - 300W.
Panel mount with M6 screw fixings on 174mm x 224mm centers.

Full part number is DCREG2.100.

Download the Technical product Manual from the link below...