Parker SSD Drives 590PX - 110A Four Quadrant DC Thyristor Drive for 220-500V Main Supply with 230V Control circuit. This is the old type 590C Chassis fitted with the new 590P (590PXD) door to upgrade and fit into the same space as the old 590C.
Typical Motor output - up to 45kW (60HP) at 460V DC for fully regenerative DC motor speed and torque control.
Keypad and analogue Tachogenerator feedback board are included.
Simple to set-up in Digital, fully-isolated Four Quadrant form.
Size 1 - 250mm Wide x 180mm Deep x 415mm High.
Terminals include:-
5 x Analogue Inputs (4 x Configurable).
3 x Analogue Outputs (2 x Configurable).
Tacho input (or internal AVF) Feedback.
10 x Digital inputs - 5 are Configurable including two as encoder inputs for a second or line encoder.
3 x Digital Outputs (all Configurable).
+ & - 10V for Potentiometers.
Input Current - 91A for Armature + up to 10A for Field.
Input Voltage - 220-500V 3 phase +-10% at 50/60Hz.
Input fuse - 160A - to suit input bridge at 8,000A²s
Use a choke in the supply at 50uH minimum.
Rated at 40C Ambient.
Ventilation space above - 100mm.
Ventilation space below - 100mm.
Ventilation space at sides - 0mm.
Heat Loss at max output - 330W.
Panel mount with screw fixings on 400 x 200mm centres.
Full part number is 590PX-53311012-P00-U4A0 was 590PX/0110/500/0011/UK/AN/0/230/0 (aslo known as 590PX-0110-500-0011-UK-AN-0-230-0)
Download the 590P and 590C technical product manual from the link below...