SSD Drives 590P Series 70A Single or Two Quadrant DC Thyristor Drive for 400V Supply with 110V or 230V Control supply (universal). Converts a three phase AC supply to DC for speed and torque control of a DC motor.
Typical Motor output: up to 28.5kW (38HP) at 460V DC for motor speed and torque control.
Keypad and analogue Tacho-generator feedback board are included.
Simple to set-up in Digital, fully-isolated Single or Two Quadrant form and ready to run from its 'Quick Set-Up' settings.
Dimensions: Size 2, 200mm Wide x 292mm Deep x 434mm High.
Terminals include:-
5 x Analogue Inputs (4 x Configurable).
3 x Analogue Outputs (2 x Configurable).
Tacho input (or internal AVF) Feedback.
10 x Digital inputs - 5 are Configurable including two as encoder inputs for a second or line encoder.
3 x Digital Outputs (all Configurable).
+ & - 10V for Potentiometers.
Input Current: 58A for Armature + up to 10A for Field.
Input Voltage: 380V/415V/440V/460V three phase +-10% at 50/60Hz.
Input fuse: 80A - to suit input bridge at 8000A²s, see the items linked below.
Use a choke in the supply at 50uH minimum, see the items linked below.
Ambient Temperature: Rated at 40C.
Ventilation space above: 160mm.
Ventilation space below: 100mm.
Ventilation space at sides: 0mm.
Heat Loss: 234W at maximum output.
Mounting: Panel mount with M6 screw fixings on 418 x 140mm centres.
Part number: 591P-53270020-P00-U4A0. Was 591P-0070-500-0011-UK-AN-0-0-0, exactly the same as Eurotherm Drives 591P-0070-500-0011-UK-AN-0-0-0.
Replaces:- SSD and Eurotherm Drives 591A-0070, 546-0700 analogue products. Used on many Extruder and general applications. Requires external back-up high speed fuses.
Download the 591P Technical product Manual from the link below...