ABB DCS550 610A 2Q 230V to 525V 3ph AC to DC Converter

ABB DCS550 Series 610A Two Quadrant DC Thyristor Drive for 230-525Vac Supply with 230Vac Control supply. Converts three phase AC to DC for speed and torque control of a DC motor.
Typical Motor output: up to 354kW (475HP) at 400Vac input for DC motor speed and torque control.

Output Current: 610A Continuous. (No overload)
Overload: 150% x 60 seconds every 15 minutes, when run at <=455A (Other duty cycles identified within the manual)
Typical Motor Output: Up to 354kW (475HP) at 465V DC for motor speed and torque control.
Field Output: 2 to 35A  @ 1.35 x Mains voltage.
AC current IAC = 0.82*IDC 
Rated voltage: 230 VAC - 525 VAC ±10 % continuous; ±15 % shorttime (0.5 to 30 cycles), 50/60Hz +/-2%Static, +/-5% dynamic

Dimensions: Frame 4  270mm Wide x 345mm Deep x 644mm High.
Weight: 38kg.

Terminals include:-
4 x Analogue Inputs (4 x Configurable).
3 x Analogue Outputs (2 x Configurable).
8 x Digital inputs - 5 are Configurable including two as encoder inputs for a second or line encoder.
4 x Digital Outputs (all Configurable).
Tacho and encoder feedback signal inputs.
±10V for Potentiometers.

Use a 4% choke in the supply at 50µH.

Ambient:  Rated at 40°C.
Ventilation space: 250mm above, 150mm below, 10mm at the sides.
Heat Loss:  1.94kW at max output.
Mounting: Panel mount with M6 screw fixings on 625 x 225mm centres.

Part number:  DCS550-S01-0610-05-00-00 (3ADT218468R0001).
Drive includes CDROM with manual, DWL and setup wizard.