Parker SSD Drives 506 3A Single Quadrant DC Thyristor Drive for 230V or 110V single phase AC input.
Typical DC Motor output from 230V AC supply: 0.43kW (0.6HP) at 180V DC for speed and torque control.
Typical DC Motor output from 110V AC supply: 0.21kW (0.3HP) at 90V DC.
Simple to set-up in analogue, non-isolated form and ready to run from its default settings.
Size 1: 105mm Wide x 80mm Deep x 140mm High.
1 - Tacho feedback input (or select armature Voltage feedback).
2 - 0V.
3 - Run input - 0V in Speed Control (or +10V in current limit to eliminate the stall protection).
4 - Speed setpoint input.
5 - +10V output for potentiometers and Run signal.
6 - Current limit input, 0/10V = 0/100% Current after preset limit.
Further 6 Auxiliary i/o on pins, including Zero Speed and Health outputs, additional speed setpoint and zero speed trim inputs.
Input Current: 3A to 4.5A (depending on motor inductance).
Input Voltage: 110 or 230V single phase +-10% at 50/60Hz.
Ambient: Rated at 40C.
Ventilation space above and below: 50mm, Ventilation space at sides - 0mm.
Heat Loss at max output: 10W.
Mounting onto symmetrical DIN rail, or panel mount with three screw fixings.
Manufacturers Part number: 506-00-20-00. Exactly the same as SSD Drives, Eurotherm Drives and RS - 506-01-20-00 (237-3170). Sometimes specified as 506002000 or 506/01/20/00.
Replaces:- SSD, Eurotherm and Rapier Drives 503 Mini Cube (when set to 3A), Shackleton System Drives 504 (3.5A Plug-in Drive).
Download the 506 Technical Product Manual from the link below. The 503 Cube Manual (now obsolete) is a link below also...