WEG CFW500 Series AC Inverter for 22kW (30HP) 400V 3 Ph motor in VxF or Sensorless Vector control to 49A. Converts fixed frequency three phase 400V input to variable frequency three phase 400V to control the speed of a standard AC induction motor.
New Generation product now available - see linked products below.
Dimensions: Size E 220mm Wide x 192mm Deep x 350mm High.
Weight: 10kg.
Overload: 150% x 60 seconds, 200% x 3 seconds
Speed Control Range: 0-500Hz
Braking (DBr): 8.6 Ohm recommended external resistor (not supplied). Use the 'Which Resistor' button on this page.
G2 (generation 2) has the same dimensions and electrical connections as the first generation (see linked products below) and is fully compatible with existing accessories. Generation 2 adds an additional port for an optional STO/SS1 plug-in module (see linked products below).
Programmable via PC using free Superdrive G2 software (USB IO module required, see linked products below).
Input Current: 60A.
Input Voltage: 380-480V Three Phase +10% -15% at 50-60Hz (48-62Hz).
EMC Compliance: integrated filters to IEC EN61800-3 Category C3 (Industrial). Can be disabled if required via a switch located under the front cover.
Mounting: Cubicle mount via 4 x slotted holes at rear for M6 bolts on 150mm x 300mm centres.
Ambient: Rated 50°C.
Ventilation space in front: 50mm, above: 110mm, below: 130mm, at sides: 40mm.
Heat Loss at max output: 750W.
Extended Warranty Available: When purchased with a WEG W22 Motor (see linked products below) the warranty for the motor and the AC Inverter can be extended to 3 years. Terms and Conditions apply, registration process is required.
Part number: CFW500E49P0T4DB20C3H00G2 or 15577407
Download the WEG CFW500 Manual, Parameter Reference and Programming Guide from the links below:-