Siemens SINAMICS PM240-2 Power Module for 110kW (150HP) 400V Three Phase Motor to 205A at High Overload or 132kW (177HP) to 250A when Fan/Pump rated. Converts fixed frequency three phase 400V Input to variable frequency three phase 400V for speed and torque control of a standard AC Induction Motor when used with a compatible G120 Series Modular Control Unit.
Add a compatible G120 Series Modular Control Unit and Operator Keypad (see linked products below) to complete the G120 Inverter Drive.
Size FSF: 305mm Wide x 357mm Deep x 708mm High (excluding Control Unit). IP20.
Weight: 65kg
110kW, 205A: 136% x 57 seconds every 5 minutes. 160% for 3 seconds every 5 minutes. High Overload.
132kW, 250A: 110% x 59 seconds every 5 minutes. 150% for 1 second every 5 minutes. Fan/Pump Rated.
Braking(DBr): to 5.5 Ohm minimum external resistor (not supplied) - use the 'Which Resistor' button on this page.
Input Voltage: Three Phase 380V-480V ± 10% at 47-63Hz.
Input Current: 235A at High Overload, 284A when Fan/Pump rated.
EMC Filters: Class A Filter.
Wall mount in clean environment or cubicle mount.
Heat Loss at max output: 2.84kW
Mounting via 4 x M8 screws at rear on 270mm x 680mm centres.
Manufacturer part number is 6SL3210-1PE32-5AL0.
Download the Siemens SINAMICS G120 Power Module PM240-2 Installation Manual from the link below:-