Lenze i550 (Generation 2) Series AC Inverter for 11kW (15HP) 400V 3 Ph motor to 23.5A. Converts fixed frequency three phase 400V input to variable frequency three phase 400V to control the speed of a standard AC Induction motor. Operates in standard VxF or Sensorless Vector mode Control.
Output rating to 23.5A
Overload: 150% x 60 seconds; 200% x 3 seconds.
Size D: 120mm Wide x 130mm Deep x 305mm High. IP20.
Weight: 3.7kg.
Speed Control Range: 0-599Hz
Braking: Internal Brake Switch fitted for use with External Brake Resistor (not supplied)
Braking Switch Limits: Min Resistance: 27 Ohms, Max Brake Current: 29 A. See Linked Products below for resistor or use the ‘Which Resistor’ button on this page.
Coated PCB's
Supplied without Keypad i5MADK00000005 for mounting on the front of the i5 Inverter. (THIS CAN BE SELECTED FROM THE LINKED ITMES BELOW)
No Control Board supplied - Power module only
Input Choke: Optional; Input Current shown without Line Reactor
Input Current: 28.4A
Input Voltage: 380-480V Three Phase +10% -15% at 50-60Hz ±5%
EMC Compliance: IEC 61800-3 Second Environment C2 (Industrial). Filter can be disconnected (Remove IT Screws)
Cubicle mount.
Rated 45°C Ambient.
Ventilation space above and below: 50mm above; 100mm below, at sides: 0mm, in front: [not specified].
Heat Loss at max output: 260W.
Mounting via 4 x 5mm diameter holes at rear on 60mm x 285mm centres (Not DIN Mountable).
Manufacturer part numbers is i5DBE311F10V10000S replaces i5DAE311F10V10000S and i5DAE311F1000000S
Download the Lenze i550 Manuals from the links below:-