WEG Automation CFW-08 Wash A1 Plus AC Frequency Inverter for 3kW (4HP) 400V 3 Ph motor in VxF or Sensorless Vector Control control to 6.5A. Simple to set-up for a standard AC Induction motor.
IP66 / NEMA 4X (indoor use) enclosure for washdown environments. Rated as 'dust tight' and protected against 'powerful jets of water'.
Size A - 165mm Wide x 216mm Deep x 265mm high. IP66.
Overload - 150% x 60 seconds every 10 minutes.
Speed Control Range - 0-300Hz.
Braking - To 100 Ohm minimum external resistor (not supplied) - use the 'Which Resistor' button on this page.
Features - Built-in membrane keypad, 2 x Analogue Inputs, 4 Digital Inputs, 1 x Analogue Output, 2 x Relay Contact sets.
Programmable from a PC via 'SuperDrive' Software.
EMC Filters - Class A to 2nd Environment C2 (Industrial).
Input Current - 7.8A.
Input Voltage - 380-480V three phase +10%, -15% at 50/60Hz ±2Hz.
Rated at 40C Ambient.
Ventilation space above - 35mm
Ventilation space below - 50mm.
Ventilation space at sides - 15mm.
Ventilation space in front - 50mm.
Heat Loss at max output - 109W.
4 x Mountings for M4 bolts at rear.
Full part number is - CFW080065T3848EON4A1FAZ
Download the WEG CFW-08 Manual from the link below:-