Vacon NXP IP54 High Performance AC Frequency Inverter for 15kW (20HP) 400V 3 Ph motor in VxF or Sensorless Vector control to 38A at high overload, or 18.5kW (25HP) to 46A when Fan/Pump rated. Simple to set up for a standard AC Induction motor.
Frame 6 - 195mm Wide x 237mm Deep x 519mm High, IP21. Weight: 18.5kg.
Overload - 200% Output Current x 2 seconds and 150% x 60 seconds at High Overload, 110% Output Current x 60 seconds when Fan/Pump rated.
Speed Control Range - 0-320 Hz (standard).
Braking - To 14 Ohm minimum external resistor (not supplied) - See the Resistor options linked below or use the 'Which Resistor' button on this page.
Safe Torque Off (STO) when OPT-AF option fitted
Features - 2 Analogue Inputs, 6 x Digital Inputs, 1 x Analogue Output, 1 x Digital Output, 2 Relay Contact sets.
Parameter setting via keypad or from a PC using 'NCDrive' software (RS232C cable required - optional).
Input Current - as output current.
Input Voltage - 380-500V -10%/+10% at 50-60Hz (± 10%)
EMC Filters to EN61800-3 category C2 (Commercial).
Wall mount using 4 x 9mm holes at rear.
Rated at 40°C Ambient.
Ventilation space required above: 160mm
Ventilation space required below: 80mm
Ventilation space at sides: 20mm
Full part number is - NXP00455-A5H1SSS-A1A2000000.
Download the Vacon NXP Manual from the link below:-