Vacon 100 Series AC Inverter for 55kW (75HP) 400V 3 Ph motor in VxF or Sensorless Vector control to 87A at high overload, or 75kW (100Hp) to 105A when Fan/Pump rated. Converts fixed frequency three phase 400V input to variable frequency three phase 400V to control the speed of a standard AC Induction motor or permanent magnet synchronous motor.
Size MR7: 645mm High x 237mm Wide x 259mm Deep.
Protection: IP21/NEMA Type 1
Weight: 40kg.
Overload: 150% x 60 seconds every 10 minutes, 200% x 2 seconds every 20 seconds
Speed Control Range: 0-320Hz.
Braking: Minimum 21 Ohm external resistor (not supplied)
Graphical keypad.
2 x Differential Analogue Inputs, 6 x Digital Inputs, 1 x Analogue Output, 3 x Relay Contact set, Thermistor input, RS485. STO.
Input Current: [as output current]
Input Voltage: 380-480Vac -10%/+10% Three Phase at 50-60Hz (± 10%).
EMC Filters: IEC EN61800-3 Category C2 1st Environment (Industrial and Domestic).
B Slot: F3, 3 Relay Board.
D Slot: E5, Profibus DP with Sub-D9.
E Slot: BJ, STO, ATEX therm.
Fieldbus: Std protocol, Modbus, N2, BacNet.
Wall mount.
Rated 40°C Ambient.
Ventilation space in above: 350mm
Ventilation space below: 200mm
Ventilation space at sides: 20mm
Heat Loss at max output: [not specified]
Mounting via 4 x 9mm diameter holes at rear on 400mm x 1122mm centres.
Manufacturer part number is VACON0100-3L-0105-5+SDE5+SEBJ.
Vacon 100 replaces NXS Series.
Download the Vacon 100 Manual from the link below:-