Vacon 100 Series AC Inverter for 15kW (20HP) 400V 3 Ph motor in VxF or Sensorless Vector control to 31A at high overload, or 18.5kW (25Hp) to 38A when Fan/Pump rated. Converts fixed frequency three phase 400V input to variable frequency three phase 400V to control the speed of a standard AC Induction motor or permanent magnet synchronous motor.
Size MR6: 195mm Wide x 229mm Deep x 557mm High. IP54/NEMA Type 12
Weight: 20kg.
Overload: 150% x 60 seconds every 10 minutes, 200% x 2 seconds every 20 seconds
Speed Control Range: 0-320Hz.
Braking: Minimum 21 Ohm external resistor (not supplied)
Graphical keypad.
2 x Analogue Inputs, 6 x Digital Inputs, 1 x Analogue Output, 2 x Relay Contact set, RS485.
Input Current: [as output current]
Input Voltage: 380-500V -10%/+10% Three Phase at 50-60Hz (± 10%)
EMC Filters: IEC EN61800-3 Category C2 1st Environment (Industrial and Domestic).
Wall mount.
Rated 40°C Ambient.
Ventilation space in above: 160mm
Ventilation space below: 80mm
Ventilation space at sides: 20mm
Heat Loss at max output: [not specified]
Mounting via 4 x 9mm diameter holes at rear on 148mm x 541mm centres.
Manufacturer part number is VACON0100-3L-0038-5+IP54
Vacon 100 replaces NXS Series.
Download the Vacon 100 Manual from the link below:-