Vacon 100X Series AC Inverter for 5.5kW (7.5HP) 400V 3 Ph motor in VxF or Sensorless Vector control to 12A. Converts fixed frequency three phase 400V input to variable frequency three phase 400V to control the speed of a standard AC induction motor or permanent magnet synchronous motor.
IP66 washdown rating for both indoor or outdoor use. Constructed from a die-cast metal enclosure and includes a breathable pressure equalizer vent to provide the best protection available.
Graphical LCP Keypad HMGR fitted
A1121 Alfa-Laval S/W
Size MM4 - 191mm Wide x 197mm Deep x 316mm High.. IP66/Type 4X
Weight: 8.8kg.
Overload: 150% x 60 seconds every 10 minutes, 200% x 2 seconds every 20 seconds
Speed Control Range: 0-320Hz.
Braking: Minimum 50 Ohm external resistor (not supplied) - use the 'Which Resistor' button on this page.
Safe Torque off (STO) to SIL3
2 x Analogue Inputs, 6 x Digital Inputs, 1 x Analogue Output, 2 x Relay Contact set, RS485.
Input Current: 11.3A
Input Voltage: 380-480V-15% +10% Three Phase at 50/60Hz ±10%
IEC EN61800-3 Category C2 1st Environment (Industrial and Domestic).
Rated 40°C Ambient.
Ventilation space in above: 160mm
Ventilation space below: 60mm
Ventilation space at sides: 80mm
Heat Loss at max output: [not specified]
Mounting via 4 x 5.9mm diameter holes at rear on 143.5mm x 296.5mm centres.
Manufacturer part number is VACON0100-3L-0012-4-X+A1121+HMGR
Download the Vacon 100X Manual from the links below:-