Schneider Altivar 31 (ATV31C) series AC Inverter for 2.2kW (3HP) 400V 3 Ph motor in VxF or Sensorless Vector control to 5.5A. Converts fixed frequency three phase 400V input to variable frequency three phase 400V for a standard AC Induction motor.
Includes ZH28 option: Main switch, Forward/Reverse selection and Potentiometer.
Size 3 - 230mm Wide x 222mm Deep x 340mm High. IP54.
Weight: 10.7kg.
Overload: 150% x 60 seconds
Speed Control Range: 0.5-500Hz
Braking: to 54 Ohm minimum external resistor (not supplied) - use the 'Which Resistor' button on this page.
3 Analogue Inputs, 1 Analogue/Digital Output, 6 Digital Inputs, 2 Relay Contact sets, RJ45 port for Modbus or CANopen communications.
Input Current: 8.9A
Input Voltage: 380-500V Three Phase ±5% at 50-60Hz ±5%
EMC Filters: IEC 61800-3 category C3 (Industrial)
Wall mount.
Rated 40°C Ambient.
Ventilation space in front: [not specified]
Ventilation space above and below: 100mm.
Ventilation space at sides: [not specified]
Heat Loss at max output: 79W.
Mounting via 4 x 5.4mm diameter holes at rear on 212mm x 318mm centres.
Manufacturer part number is ATV31CU22N4ZH28. Previously sold under the Telemecanique brand.
Download the Schneider Electric Altivar ATV 31C Manual from the link below:-