Parker SSD 890 Series AC Frequency Inverter for 7.5kW 400V 3 Ph motor to 16A or 10HP 500V 3ph motor to 14A (16.0A Servo Mode). 30% more Peak. Suitable for a Standard AC Induction Motor in VxF, Sensorless Vector Control or Full Closed Loop Vector Control with an optional Speed Feedback Card. Also suitable to control a PM Brushless AC Servo Motor when fitted with an optional Feedback Card. (See Feedback Options below)
Size B - 72.4mm Wide x 258.5mm Deep x 433.6mm High. IP20
Weight: 5kg.
Overload - 150% x 60 seconds
Speed Control Range: 0-1000Hz (VxF), 0-350Hz (Closed-loop Vector), 0-120Hz (Sensorless Vector).
Braking - To 56 Ohm minimum external resistor (not supplied) - See the Resistor options linked below or use the 'Which Resistor' button on this page.
Safe Torque Off to SIL3 or PLe level as per EN ISO13849 and EN61800-5-2.
4 Analogue Inputs, 7 Digital Inputs, 2 Analogue Outputs, 2 Digital Inputs/Outputs, 1 Relay Contact Set, USB port for Programming.
Input Current - 21.7A.
Input Voltage - 380 - 500Vac ±10% at 50/60Hz
EMC Compliance: IEC EN 61800-3 Category C3 (Industrial)
Wall mount in clean environment or cubicle mount.
Rated 40°C Ambient.
Ventilation space in front - [Not Specified]
Ventilation space above and below - 150mm.
Ventilation space at sides - 0mm (drives can be mounted side by side).
Mounting via 2 x holes at rear (1 top, 1 bottom) on 413.6mm centres.
Mounting onto 35mm DIN rail using included fitting kit.
Full part number is - 890SD-53216SB0-B00-1A000.
Download the Parker 890SD Manual and Programming Guide from the links below:-