Parker AC15 series AC Inverter for 4W 400V three phase motor in V/F or Sensorless Vector control to 9A. Converts fixed frequency three phase 400V input to variable frequency three phase 400V to control the speed of a standard AC Induction motor or Permanent Magnet Synchronous motor
Frame 2: 109mm W x 185mm D x 180mm H (228mm H with Optional Shielding Clamp – see linked items below). IP20
Weight: 2kg
Rating: 4kW, 9A , xxkVA
Overload: 150% for 60 seconds
Speed Control Range: 0.5 to 590Hz
Dynamic Braking (DBr): Fitted with Internal Braking Switch. Fit external Braking resistor if this feature is required (Resistor not supplied, see linked products below)
Minimum Braking resistance: 90 Ohms (8.5A 6.5kW), 20 sec max or 30% duty cycle; 100% Duty Braking resistance: 147 Ohms (5.2A, 4kW)
Fixed Keypad with Single Line LCD Display and Indicators. Optional Remote Keypad (6901) is available see linked items below, uses RJ11 port
2 Analogue Inputs, 6 Digital Inputs (2 High Frequency), 2 Digital Inputs/Outputs (Multifunctional), 3 Analogue Outputs, 1 NO Relay Contact (230Vac/ 30Vdc 2A), 1 Thermistor Input (Link required if not fitted)
PC Program with DSELite tool using a CAT5e or CAT6 programming cable, RJ45 Port
Communications: Ethernet IP or Modbus TCP, RJ45 Port
Option Cards not available for this product. Slot for Memory Card (microSD, not supplied)
Safety Functionality: STO included. To SIL2, PLd. Links required to allow the unit to operate if there is no safety circuit
24Vdc Auxiliary Control Power Input
EMC Compliance: Integrated Filters to IEC EN61800-3 Category C3 for motor cables up to 25m. Filter can be disabled by removing link if required
Input Current: 11A
Mains Supply: Three Phase 380-480Vac +/-10%, 50-60Hz (+/-10%)
Please note that an AC Line Choke is recommended where the mains supply is between 12kA and 50kA RMS (480V max)
20A Fast Acting Fuse required. See product manual for full details including UL Rating details.
Cubicle Mount
Operating Temperature: 0 to 40°C (45°C with de-rate)
Mounting: Use 4 x M4 fixings on 170mm x 94mm centres. Cannot be DIN or through panel mounted
Ventilation Space: Top: 150mm, Bottom: 150mm, Sides: 50mm, Front: 10mm
Losses at maximum output: xxW, xxW at standby. IE2 Efficiency Rated
Manufacturers Part Number: 15G-42-0090-BF
Previous Generation: 650V