Control Techniques M701 series. 400Vac 3 phase input. 22kW Heavy Duty or 30kW Normal Duty. V/Hz, Open Loop Rotor Flux Control for enhanced performance of induction motors, Closed Loop Rotor Flux Control of induction motors, supporting a wide range of feedback devices. Open Loop Premenant Magnet Motors Control and Closed Loop Control of Permenant Magnet AC motors. AFE for high quality power regeneration.
Frame 6: 365mm high x 210mm wide x 227mm deep; IP20.
Weight: 14kg.
Overload: 150% x 60 seconds (Heavy Duty) or 110% x 60 seconds (Normal Duty)
Speed Control Range: 0-550Hz
Dynamic Braking (DBr): Internal Brake Switch fitted. (Does not have to be used; available if required), minimum resistance 20 Ohm, continuos power rating of 32.7kW.
Keypad NOT fitted as standard. Keypad options available below.
The M701 has identical control connections to the Unidrive SP.
3 x Analogue input, 2 x Analogue output, 4 x Digital input, 1 x Digital output, 3 x Bi directional digital input or output, 1 x relay, 1 x STO terminal. RS485 Modbus communications supports Modbus RTU Master and Follower and Modbus ASCII Master and Follower applications (with SI-Applications Plus module).
2 channel encoder input + 1 sumulated encoder output. Supports EnDat 2.2, Hiperface and SSI.
Communications options include ProfiNet, EtherCAT, Profibus, DeviceNet, CANOpen plus connectivity to legacy CTNet system.
Max Continuos Input Current: 60A. Max output Current 47A (Normal Duty), 42A (Heavy Duty).
Input Voltage: 380-480V Three Phase ±10% at 50Hz ±5%
EMC Compliance: IEC EN 61800-3 Category C3 (Industrial). Optional external emc fitler available.
Earth Leakage = 28mA at 400V, 50Hz. With filter removed, <1mA.
Cubicle mount.
Surface mount brackets 370mm apart use 2 x 5.5mm holes 70mm apart or 3 x 6.2 mm holes 40mm apart if retro fitting into a Unidrive SP slot. These are supplied with the drive.
Through panel mount using bracket kit (CT part number 3470-0067).
The drive can also be tile mounted in areas where there is limited space using the correct bracket kit (CT part number 3470-0073).
Ambient operating temperature to 40°C.
Ventilation space in front: [not specified], above and below: 100mm, at sides: 0mm (between drives).
Part No: M701-06400470A10100AB100 (M701-06400470A10)
M701 is the replacement for the Unidrive SP series. The Migration guide is in the link below.