Control Techniques M700 series. 400Vac 3 phase input. 1.5kW Heavy Duty or 2.2kW Normal Duty. V/Hz, Open Loop Rotor Flux Control for enhanced performance of induction motors, Closed Loop Rotor Flux Control of induction motors, supporting a wide range of feedback devices. Open Loop Premenant Magnet Motors Control and Closed Loop Control of Permenant Magnet AC motors. AFE for high quality power regeneration.
Frame 3: 365mm high x 83mm wide x 200mm deep; IP20.
Weight: 4.5kg.
Overload: 150% x 60 seconds (Heavy Duty) or 110% x 60 seconds (Normal Duty)
Speed Control Range: 0-550Hz
Dynamic Braking (DBr): Internal Brake Switch fitted. (Does not have to be used; available if required), minimum resistance 74 Ohm continuos power rating 2.8kW.
Keypad NOT fitted as standard. Keypad options available below.
3 x Analogue input, 2 x Analogue output, 4 x Digital input, 1 x Digital output, 3 x Bi directional digital input or output, 1 x relay, 1 x STO terminal. Dual port ethernet switch provides real time position synchronisation.
2 channel encoder input + 1 sumulated encoder output. Supports EnDat 2.2, Hiperface and SSI.
Communications options include ProfiNet, EtherCAT, Profibus, DeviceNet, CANOpen plus connectivity to legact CTNet system.
Max Continuos Input Current: 9.1A. Max output Current 6.2A (Normal Duty), 4.5A (Heavy Duty).
Input Voltage: 380-480V Three Phase ±10% at 50Hz ±5%
EMC Compliance: IEC EN 61800-3 Category C3 (Industrial). Optional external emc fitler available.
Earth Leakage = 28mA at 400V, 50Hz. With filter removed, <1mA.
Cubicle mount.
Surface mount brackets 370mm apart use 2 x 5.5mm holes 70mm apart or 3 x 6.2 mm holes 40mm apart if retro fitting into a Unidrive SP slot. These are supplied with the drive.
Through panel mount using bracket kit (CT part number 3470-0053).
The drive can also be tile mounted in areas where there is limited space using the correct bracket kit (CT part number 3470-0049).
Part No: M700-03400045A10100AB100 (M700-03400045A10)
Ambient operating temperature to 40°C.
Ventilation space in front: [not specified], above and below: 100mm, at sides: 0mm (between drives).