LS Industrial Systems Starvert iS7 series AC Inverter for 15kW (20HP) 400V 3 Ph motor to 30A at high overload, or 18.5kW (25HP) to 39A when Fan/Pump rated. Operates in VxF, Sensorless Vector or Full Closed-loop Flux Vector (when the optional Encoder Feedback card is fitted). Converts fixed frequency three phase 400V input to variable frequency three phase 400V to control the speed of a standard AC induction motor.
Size 3: 313.3mm Wide x 294.4mm Deep x 590.8mm High. IP54
Weight: 23.1kg.
Overload: 150% x 60 seconds, (High Overload)
Overload: 110% x 60 seconds (Fan/Pump rated)
Speed Control Range: 0-400Hz
Braking: Minimum 30 Ohm minimum external resistor (not supplied) - use the 'Which Resistor' button on this page.
2 Analogue Inputs, 8 Digital Inputs, 2 Analogue Outputs, 1 Digital Output, 2 Relay Contact sets, Modbus RTU Communications.
Input Current: 33A (high overload), 44A (fan/pump rated)
Input Voltage: 380-480V Three Phase +10% -15% at 50-60Hz ±5%
EMC Filters: Integrated, to EN 61800-3 (industrial). Can be disabled via connector switch if necessary.
Wall mount.
Rated 50°C Ambient (high overload), 40°C ambient (fan/pump rated).
Ventilation space in front: [not specified].
Ventilation space above and below: 100mm.
Ventilation space at sides: 50mm.
Heat Loss at max output: [not specified]
Mounting via 4 x 6.5mm diameter holes at rear on 214.6mm x 355mm centres.
Can be used with two phase input at 40% de-rating for motor control, to replace a capacitor based phase converter supply.
Manufacturer part number is SV0150iS7-4SPF.
Download the LS Starvert iS7 Manual from the links below:-