LS G100 AC Frequency Inverter for 1.5kW (2HP) 400V 3 Ph motor to 4A at High Overload or 2.2kW (3HP) to 5.1A when Fan/Pump rated. Operates in VxF or Sensorless Vector Control and converts fixed frequency three phase 400V to variable frequency three phase 400V to control the speed of a standard AC Induction motor
Rating: 1.5kW, 4A with 150% overload for 60 seconds (High Overload)
Rating: 2.2kW, 5.1A with 120% overload for 60 seconds (Fan/Pump - Parameter change is required during commissioning to achieve Fan/Pump rating)
IP20 Cubicle Mount
Frame Size 2: 101.2mm Wide x 151.1mm Deep x 177.2mm high
Speed Control Range: 0-400Hz (V/F) or 0-120Hz (Sensorless Vector)
Braking (DBr): 300 Ohm minimum external resistor (not supplied). See Resistor option linked below
Fixed Keypad with built in Potentiometer
1 x Analogue Input, 5 Digital Inputs, 1 x Analogue Output, 2 x Relay Outputs (1 Set, 1 N/C)
RS 485 Communications via RJ45 or twin wire terminal connection. Supports Modbus RTU and LS INV485 protocols
Programmable from a PC using PC Tool ‘DriveView9’
STO: Not Included
Input Current: 4A (High Overload), 5.1A (Fan/Pump)
Input Voltage: Three phase 380-480 Vac +10%, -15% at 50-60Hz ±5%
EMC Filters: Category C3 EMC Filters to meet EN618000-3. Can be disabled if required
Rated at 40C Ambient
Losses: 40W (High Overload), 47W (Fan/Pump)
Ventilation space above and below: 100mm
Ventilation space at sides: 50mm; 3mm between multiple G100 Units
Ventilation space at front: 50mm
Mounting: Can be DIN rail or Panel mounted with 4 x 4mm fixings on 90mm x 167mm Centres
Full Part Number: LSLV0015G100-4E0FN
Previous Generation: IG5A, SV015iG5A-4
Download the LS G100 Manual from the link below:-