LS G100 AC Frequency Inverter for 0.4kW (0.5HP) 230V 3 Ph motor to 2.5A at High Overload or 0.75kW (1HP) to 3.1A when Fan/Pump rated. Operates in VxF or Sensorless Vector Control and converts fixed frequency three phase 400V to variable frequency three phase 400V to control the speed of a standard AC Induction motor
Can also be supplied 1 Phase to1.5A at High Overload or to 2.5A when Fan/Pump rated.
Rating: 0.4kW, 2.5A with 150% overload for 60 seconds (High Overload)
Rating: 0.75kW, 3.1A with 120% overload for 60 seconds (Fan/Pump - Parameter change is required during commissioning to achieve Fan/Pump rating)
IP20 Cubicle Mount
Frame Size 1: 86.4mm Wide x 140mm Deep x 165mm high
Weight: 1.04kg
Speed Control Range: 0-400Hz (V/F) or 0-120Hz (Sensorless Vector)
Braking (DBr): 300 Ohm minimum rated capacity 100W external resistor (not supplied). See Resistor option linked below
Fixed Keypad with built in Potentiometer
1 x Analogue Input, 5 Digital Inputs, 1 x Analogue Output, 2 x Relay Outputs (1 Set, 1 N/C)
RS 485 Communications via RJ45 or twin wire terminal connection. Supports Modbus RTU and LS INV485 protocols
Programmable from a PC using PC Tool ‘DriveView9’
STO: Not Included
Input Current: 2.2A (High Overload), 3.3A (Fan/Pump)
Input Voltage: Three phase 200 to 240Vac +10%, -15% at 50-60Hz ±5%
EMC Filters: None
Rated at 40C Ambient
Losses: 19W (High Overload), 24W (Fan/Pump)
Ventilation space above and below: 100mm
Ventilation space at sides: 50mm; 3mm between multiple G100 Units
Ventilation space at front: 50mm
Mounting: Can be DIN rail or Panel mounted with 4 x 4mm fixings on 76.2mm x 154mm Centres
Full Part Number: LSLV0004G100-2EONN (LV0004G100-2EONN)
Previous Generation: IG5A, SV004iG5A-2
Download the LS G100 Manual from the link below:-