Invertek Optidrive E3 IP20 series AC Inverter for 2.2kW (3HP) 400V three phase motor in VxF or sensorless vector control to 5.8A. Converts fixed frequency three phase 400V input to variable frequency 400V to control the speed of a IE2, IE3 or IE4 standard AC Induction Motor, Permanent Magnet motor, Brushless DC Motor or Synchronous Reluctance Motor.
Dimensions: Size 2 110mm Wide x 150mm Deep x 221mm High.
Enclosure Rating: IP20.
Weight: 1.7kg.
Overload: 150% x 60 seconds, 175% x 2.5 seconds.
Speed Control Range: 0-500Hz.
Braking (DBr): Braking: To 200 Ohm minimum external resistor (not supplied).
Features: Integrated operator keypad with LED display, 2 Digital Inputs, 2 Analogue/Digital Inputs, 1 Analogue/Digital Output, 1 Relay Contact set, RJ45 socket for Modbus RTU or CANopen communications over RS485.
Input Current: 7.5A.
Input Voltage: 380V-480V Three Phase ±10% (max 500V) at 50-60Hz ±5%.
EMC Compliance (C2 EMC): IEC EN61800-3:2004 Category C2 (Industrial and restricted Domestic).
Mounting: Cubicle mount via 4 x 5.5mm holes at rear on 63mm x 209mm centres.
Ambient Temperature: Rated 50°.
Ventilation space in front: [Not Specified].
Ventilation space above and below: 75mm.
Ventilation space at sides: 50mm.
Part Number: ODE-3-240058-3F42. Replaces Optidrive E2 of equivalent rating.
Made in the UK.
Download the Invertek Optidrive E3 Manual from the link below:-