Invertek Optidrive Plus 3GV Series AC Frequency Inverter for 4kW (5HP) 230V 3 Ph motor in VxF, Sensorless Vector or full Full Closed Loop Flux Vector control (when the optional encoder board is fitted) to 9.5A. Converts fixed frequency three phase 400V input to variable frequency three phase 400V for a standard AC Induction motor.
Size 2: 260mm Wide x 175mm Deep x 260mm High. IP20
Weight: 2.6kg
Overload: 150% x 60 seconds
Speed Control Range - 0-500Hz.
Braking: to 33 Ohm minimum external resistor (not supplied) - use the 'Which Resistor' button on this page.
2 Analogue/Digital Inputs, 1 Analogue/Digital Outputs, 1 Digital Input, 1 Digital Input/Output, 1 Relay Contact set, RJ11 port for Modbus RTU communications.
Input Current - 12.4A
Input Voltage - 380-480V ± 10% Three Phase at 48-62Hz
EMC Filters:
EN61800-3 category C1 for screened cable lengths of up to 5m
EN61800-3 category C2 for screened cable lengths of up to 25m
EN61800-3 category C3 for screened cable lengths of up to 50m
Wall mount in clean environment or cubicle mount.
Rated 40°C Ambient.
Ventilation space in front: 125mm.
Ventilation space above and below: 100mm.
Ventilation space at sides: 95mm.
Heat Loss at max output: [not specified].
Mounting via 2 x M4 keyhole slots at rear on 92mm x 260mm centres.
Manufacturer Part Number is ODP-24400-IN or ODP-24400-USA
The suffix -IN specifies rating in kW, -USA specifies rating in HP.
Made in the UK.
Download the Invertek Optidrive Plus 3GV Manual from the link below:-