IMO iDrive2 Series AC Inverter for 2.2kW (3HP) 400V 3 phase motor to 5.5A. Operates in VxF control and converts fixed frequency three phase 400V input to variable frequency three phase 400V to control the speed of a standard AC Induction motor.
Size 2: 100mm Wide x 153.2mm Deep x 170.5mm High. IP20.
Overload: 150% x 60 seconds, 180% x 10 seconds, 200% x 1 second.
Speed Control Range: 0-400Hz
Braking: 100% Duty to Minimum 54 Ohm, Maximum 222 Ohm external resistor (not supplied) - See the Linked products below or use the 'Which Resistor' button on this page.
Removable Keypad, 1 Analogue Input, 4 Digital Inputs, 1 Digital Input/Output, 1 Analogue Output, 1 Digital Output, 1 Relay Contact Set, Terminals for Modbus RS485 Communications.
Input Current: 7.1A
Input Voltage: 380-480V Three Phase +10% -15% at 50-60Hz ±5%
EMC Compliance: No integrated EMC filters. External C3 (Industrial) or C3 (restricted Domestic) filters are available - see linked products below.
Cubicle mount or wall mount in clean, dry environment.
Rated 40°C Ambient.
Ventilation space in front: [not specified], above and below: 100mm, at sides: 0mm.
Heat Loss at max output: [not specified]
Mounting via 2 x 5mm holes at rear on 89mm x 154mm centres.
Manufacturer part number is XKL-220-43.
Download the IMO iDrive2 Manual from the links below:-