IMO HD2 Series AC Inverter for 75kW 400V 3ph motor to 150A. Operates in VxF, Sensorless Vector or Full Closed-loop Vector control (with the optional encoder feedback card) and converts fixed frequency Three Phase 400V input to variable frequency Three Phase 400V to control a standard AC induction or permanent magnet synchronous motor.
Size 6: 282mm Wide x 257mm Deep x 560mm High. IP20.
Weight: 25kg.
Overload: 150% for 60 seconds. 200% for 1 second
Speed Control Range: 0-400Hz.
Braking (DBr): Not Fitted.
Includes removable Operator Keypad
2 Analogue Inputs, 6 Digital Inputs (2 Pulse Inputs), 1 Analogue Outputs, 2 Digital Output (1 Pulse Output), 2 Relay Outputs (Change-over)
Serial Communications: Terminals for Modbus RS485
Safe Torque Off (STO) function to SIL2 (EN61800-5-2)
Input Current: 160A
Input Voltage: 380-480V Three Phase -15% +10% at 50-60Hz ±5%.
EMC Filter: IEC EN 61800-3 Category C3 (Industrial).
Cubicle mount.
Rated ambient: 40°C. Maximum ambient: 50°C (De-rate required)
Ventilation space in front: [not specified], above: 100mm, below: 100mm, at sides: 100mm.
Heat Loss at max output: xxW
Mounting via 4 x M8 bolts (not supplied) at rear on 542mm x 160mm centres.
Manufacturer part number is HD2-150A-43.