Danfoss FC-102 Series AC Inverter for 5.5kW (7.5HP) 400V 3 Phase Fan or Centrifugal Pump in VxF control to 13A. Converts fixed frequency three phase 400V input to variable frequency three phase 400V to control the speed of a standard AC Induction Motor.
**This product is a non standard item, cannot be cancelled once order is placed**
Size A5: 242mm Wide x 200mm Deep x 420mm High. IP55.
Weight: 14kg (approx.)
Overload: 110% x 60 seconds, 135% x 0.5 seconds.
Speed Control Range: 0-590Hz
Braking: Safe Stop.
Option included: MCB-114 VLT Sensor Input.
Graphical Keypad included, 2 Analogue Inputs, 4 Digital Inputs, 1 Analogue Output, 2 Digital Input/Outputs, 2 Relay Contact sets, DC Bus +/- Terminals, Terminals for RS485 Communications.
FC Protocol, N2 Metasys, FLN Apogee communication protocols built-in as standard.
Programmable from a PC via USB and free Danfoss MCT 10 software.
Input Current: 11.7A
Input Voltage: 380-480V Three Phase ±10% at 50-60Hz ±5%
EMC Compliance: IEC EN55011 Second Environment Class C2 (Industrial / Domestic). For First Class Compliance (C1) Motor cables are limited to 10m. Filter can be disabled if required.
Wall mount in clean environment or cubicle mount.
Rated 50°C Ambient.
Ventilation space in front: [not specified], above and below: 100mm, at sides: 0mm.
Heat Loss at max output: 187W
Mounting via 4 x holes at rear on 215mm x 402mm centres.
Full Manufacturer type code is FC-102P5K5T4E55H3TGXXXXSXXXXAXB4CXXXXDX. (132H5268).
Download the Danfoss FC102 Manual from the links below:-