Danfoss VLT AutomationDrive FC 300 Series AC Frequency Inverter for 3kW (4 HP) 400V 3 Phase Motor in VxF control to 7.2A.
Size A5 - 242mm Wide x 200mm Deep x 420mm high. IP55.
Weight: 13kg.
Output Current: 7.2A.
Overload - 160% x 60 seconds, 180% x 0.5 seconds
Speed Control Range - 0.2-590Hz
Braking - Included.
2 x Analogue Inputs, 4 x Digital Inputs, 1 x Analogue Output, 2 x Digital Outputs, 1 x Relay Contact set, FC Protocol, Modbus RTU.
Programmable from a PC via Danfoss MCT 10 Software.
No Keypad Fitted.
Input Current - 6.5A.
Input Voltage - 380-480V Three Phase ±10% at 50-60Hz.
EMC Filters to IEC/EN 61800-3 2nd Environment (Industrial).
Wall mount in clean environment or cubicle mount.
Rated at 40°C Ambient.
Ventilation space above and below - 100mm.
Ventilation space at sides - 0mm (drives can be mounted side by side)
Heat Loss at max output - 124W.
Efficiency - 97%
Mounting via 4 x 6.5mm diameter holes at rear on 171mm x 401mm centres
String Code is: FC-301P3K0T4E66H1BXXXXXSXXXXAXBXCXXXXDX
Download the Danfoss VLT AutomationDrive FC 301 Manual from the link below:-