Danfoss VLT FC-302 series AC Frequency Inverter for 18.5kW (25HP) 400V three phase motor to 37.5A at High Overload or 22kW (30HP) to 44A when Fan/Pump rated.
Operates in VxF control or Sensorless Vector control. Converts fixed frequency three phase 400V input to variable frequency three phase 400V to control the speed of a standard AC
Induction motor or permanent magnet synchronous motor.
Size B2: 650mm High by 242mm Wide by 260mm Deep
IP55(E55) / Type 12
Weight: 28.7kg.
Overload - 150% x 60 seconds for 1 minute in 10 minutes, 180% x 0.5 seconds
Braking - None.
2 x Analogue Inputs, 4 x Digital Inputs, 1 x Analogue Output, 2 x Digital Outputs, 1 x Relay Contact set, FC Protocol, Modbus RTU.
Programmable from a PC via Danfoss MCT 10 Software
Option:
(A0) PROFIBUS DP MCA 101
(O) Metric thread cable entry
(G) Graphical Loc. Cont. Panel
Input Current - 34A.
Input Voltage - 380-500V Three Phase ±10% at 50-60Hz.
EMC Compliance: IEC EN55011 Second Environment Class C3 (Industrial)
Wall mount in clean environment or cubicle mount.
Rated at 40°C Ambient.
Ventilation space above and below - 100mm.
Ventilation space at sides - 0mm (drives can be mounted side by side)
Heat Loss at max output - 444W.
Mounting via 4 x 5mm diameter holes at rear on 210mm x 264mm centres
Code No :136X5478
Model Code: FC-302P18KT5E55H2XGXXOXSXXXXA0BXCXXXXDX
Download the Danfoss VLT AutomationDrive FC 300 Manual from the link below:-