Danfoss FC-102 Series AC Inverter for 1.5kW (2HP) 400V 3 Phase Fan or Centrifugal Pump in VxF control to 4.1A. Converts fixed frequency three phase 400V input to variable frequency three phase 400V to control the speed of a standard AC Induction Motor.
Size A4: 200mm Wide x 175mm Deep x 390mm High. IP55.
Weight: 8.9kg.
Overload: 110% x 60 seconds, 135% x 0.5 seconds.
Speed Control Range: 0-590Hz
Braking: None.
Graphical Keypad, 2 Analogue Inputs, 4 Digital Inputs, 1 Analogue Output, 2 Digital Input/Outputs, 2 Relay Contact sets, DC Bus +/- Terminals, Terminals for RS485 Communications.
FC Protocol, N2 Metasys, FLN Apogee communication protocols built-in as standard.
Programmable from a PC via USB and free Danfoss MCT 10 software.
Input Current: 3.7A
Input Voltage: 380-480V Three Phase ±10% at 50-60Hz ±5%
EMC Compliance: IEC EN55011 Second Environment Class C2 (Domestic and Industrial). For First Environment (C1) Motor cables are limted to 10m. Filter can be disabled if required.
Wall mount in clean environment or cubicle mount. Includes mains disconnect switch.
Rated 45°C Ambient.
Ventilation space in front: [not specified], above and below: 100mm, at sides: 0mm.
Heat Loss at max output: 62W
Mounting via 4 x holes at rear on 171mm x 401 centres.
Manufacturer part number is 131Z8279.
Full Type code is FC-102P1K5T4Z55H3XGX1OXSXXXXAXBXCXXXXDX.
Download the Danfoss FC102 Manual from the links below:-