Danfoss FC-102 Series AC Inverter for 1.5kW (2HP) 400V 3 Phase Fan or Centrifugal Pump in VxF control to 3.7A. Converts fixed frequency three phase 400V input to variable frequency three phase 400V to control the speed of a standard AC Induction Motor.
Size H1: 75mm Wide x 168mm Deep x 195mm High. IP20.
Weight: 2.1kg.
Braking: None.
No Graphical Keypad Fitted.
2 Analogue Inputs, 5 Digital Inputs, 2 Analogue Outputs, 2 Relay Contact sets, DC Bus +/- Terminals, Terminals for RS485 Communications.
Input Voltage: 380-480V Three Phase ±10% at 50-60Hz ±5%
Input Current: 380-440V 3.5A.
Input Current: 440-480V 3.4A.
EMC Compliance: IEC EN55011 Class C2 (Industrial/Commercial). Can be disabled if required.
Wall mount in clean environment or cubicle mount.
Rated 40°C Ambient.
Ventilation space in front: [not specified], above and below: 100mm, at sides: 0mm.
Heat Loss at max output: 46/57W
Mounting via 4 x 4.5mm holes at rear on 56mm x 183mm centres.
Manufacturer part number is 131L9863.
Full Type code is FC-101P1K5T4E20H4XXCXXXSXXXXAXBXCXXXXDX.
Download the Danfoss FC101 Manual from the links below:-