Danfoss FC-102 Series AC Inverter for 15kW (20HP) 400V 3 Phase Fan or Centrifugal Pump in VxF control to 32A. Converts fixed frequency three phase 400V input to variable frequency three phase 400V to control the speed of a standard AC Induction Motor.
Size B1: 242mm Wide x 260mm Deep x 480mm High. IP55.
Weight: 23kg.
Overload: 110% x 60 seconds, 135% x 0.5 seconds.
Speed Control Range: 0-590Hz
Braking: None.
Graphical Keypad, 2 Analogue Inputs, 4 Digital Inputs, 1 Analogue Output, 2 Digital Input/Outputs, 2 Relay Contact sets, DC Bus +/- Terminals, Terminals for RS485 Communications.
FC Protocol, N2 Metasys, FLN Apogee communication protocols built-in as standard.
Programmable from a PC via USB and free Danfoss MCT 10 software.
Input Current: 29A
Input Voltage: 380-480V Three Phase ±10% at 50-60Hz ±5%
EMC Compliance: IEC EN55011 / EN/IEC 61800-3 First/Second Environment Class. Motor cables are limited to < 2.5m for C1, < 25mfor C2 & < 50m for C3 compliance. Filter can be disabled if required.
Wall mount in clean environment or cubicle mount.
Rated 45°C Ambient.
Ventilation space in front: [not specified], above and below: 200mm, at sides: 0mm.
Heat Loss at max output: 392W
Mounting via 4 x holes at rear on 210mm x 454 centres.
Manufacturer part number is 131L9241.
Full Type code is FC-102P15KT4E55H3XGXXOXSXXXXAXBXCXXXXDX.
Download the Danfoss FC102 Manual from the links below:-