Danfoss FC-102 Series AC Inverter for 7.5kW (10HP) 400V 3 Phase Fan or Centrifugal Pump in VxF control to 16A. Converts fixed frequency three phase 400V input to variable frequency three phase 400V to control the speed of a standard AC Induction Motor.
Size A3: 130mm Wide x 205mm Deep x 268mm High. IP20.
Weight: 6.6kg.
Overload: 110% x 60 seconds, 135% x 0.5 seconds.
Speed Control Range: 0-590Hz
Braking: None. No HMI Fitted.
2 Analogue Inputs, 4 Digital Inputs, 1 Analogue Output, 2 Digital Input/Outputs, 2 Relay Contact sets, DC Bus +/- Terminals, Terminals for RS485 Communications.
FC Protocol, N2 Metasys, FLN Apogee communication protocols built-in as standard.
Programmable from a PC via USB and free Danfoss MCT 10 software.
Input Current: 14.4A
Input Voltage: 380-480V Three Phase ±10% at 50-60Hz ±5%
EMC Compliance: IEC EN55011 Second Environment Class C3 (Industrial). Can be disabled if required.
Wall mount in clean environment or cubicle mount.
Rated 45°C Ambient.
Ventilation space in front: [not specified], above and below: 100mm, at sides: 0mm.
Heat Loss at max output: 255W
Mounting via 4 x holes at rear on 110mm x 257mm centres.
Manufacturer part number is 131G8886.
Full Type code is FC-102P7K5T4E20H1TXXXXXSXXXXAXBXCXXXXDX.
Download the Danfoss FC102 Manual from the links below:-