Control Techniques M701 series. 400Vac 3 phase input. 15kW Heavy Duty or 18.5kW Normal Duty. V/Hz, Open Loop Rotor Flux Control for enhanced performance of induction motors, Closed Loop Rotor Flux Control of induction motors, supporting a wide range of feedback devices. Open Loop Premenant Magnet Motors Control and Closed Loop Control of Permenant Magnet AC motors. AFE for high quality power regeneration.
Frame 6: 365mm high x 210mm wide x 227mm deep; IP20.
Weight: 14kg.
Overload: 150% x 60 seconds (Heavy Duty) or 110% x 60 seconds (Normal Duty)
Speed Control Range: 0-500Hz
Dynamic Braking (DBr): Internal Brake Switch fitted. (Does not have to be used; available if required), minimum resistance 20 Ohm, Instantaneous power rating = 33.8kW, continuos power rating of 21.6kW.
Keypad NOT fitted as standard. Keypad options available below.
3 x Analogue input, 2 x Analogue output, 4 x Digital input, 1 x Digital output, 3 x Bi directional digital input or output, 1 x relay, 1 x STO terminal. Industry Standard dual port ethernet switch supporting IEEE 1588 V2 synchronisation.
2 channel encoder input + 1 simulated encoder output. Supports EnDat 2.2, Hiperface and SSI.
Communications options include Ethernet, ProfiNet, EtherCAT, Profibus, DeviceNet, CANopen plus connectivity to legacy CTNet system.
Max output Current 35A (Normal Duty), 38A (Heavy Duty).
Input Voltage: 380-480V Three Phase ±10% at 50Hz ±5%
EMC Compliance: IEC EN 61800-3 Category C3 (2nd Environment). Optional external emc fitler available.
Cubicle mount.
Surface mount uses 4 x 7mm holes 378mm x 196mm apart.
Through panel mount using bracket kit (CT part number 3470-0055).
Ambient operating temperature to 40°C.
Ventilation space in front: [not specified], above and below: 100mm, at sides: 0mm (between drives).
Part No: M700-06400350A10100AB100 (M700-06400350A10)