Bosch Rexroth EFC 5610 Series AC Inverter for 4kW (5HP) 400V 3 Ph motor to 9.7A. Operates in standard VxF or Sensorless Vector Control and converts fixed frequency three phase 400V input to variable frequency three phase 400V to control the speed of a standard AC Induction motor.
**Cold Plate: Not fitted with heatsink or cooling fans. Needs to be fitted to an external Heatsink to ensure adequate cooling; see product manual for further details**
Size D: 120mm Wide x 231mm High x 116mm Deep (124mm incl. Keypad potentiometer). IP20.
Weight: 1.8kg.
Overload: 150% x 60 seconds
Speed Control Range: 0-400Hz
Dynamic Braking (DBr): 100% duty to minimum 140 Ohm, maximum 150 Ohm external resistor (not supplied) - see the linked products below or use the 'Which Resistor' button on this page.
Removable Keypad included, 2 Analogue Inputs, 5 Digital Inputs, 1 Analogue Output, 1 Open Collector, 1 Relay Contact set, Terminals for RS485/Modbus communications, Mini-USB Port.
Input Current: 11.9A.
Input Voltage: 380-480V Three Phase +10% -15% at 50-60Hz ±5%
EMC Compliance: IEC 61800-3 Second Environment C3 (Industrial).
STO Included. SIL3, Cat 4.
Heatsink mount. (Unpainted metal surface able to sink the losses through the Cold Plate)
Rated Ambient: 45°C (55°C with de-rating). Max Temperature of Cold Plate: 70°C
Heat Loss at max output: 180W total (106W Cold Plate)
Mount on to suitable heatsink using 4 x M4 Fixings. Heat Compound must be used to ensure good thermal transfer. (see product manual for full details)
Manufacturer part number is EFC5610-4K00-3P4-MDB-7P-NNNNN-L1NN, R912007358
Replaces the IndraDrive Fc where the application permits.
Download the Bosch Rexroth EFC 5610 Manual from the link below:-