Bosch Rexroth EFC 5610 Series AC Inverter for 2.2kW (3HP) 400V 3 Ph motor to 5.6A. Operates in standard VxF or Sensorless Vector Control and converts fixed frequency three phase 400V input to variable frequency three phase 400V to control the speed of a standard AC Induction motor.
Size C: 95mm Wide x 170mm Deep x 206mm High. IP20.
Weight: 1.9kg.
2.2kW, 5.6A with 150% overload for 60 seconds (High Overload)
Speed Control Range: 0-400Hz
Dynamic Braking (DBr): 100% duty to minimum 230 Ohm, maximum 270 Ohm external resistor (not supplied) - see the linked products below or use the 'Which Resistor' button on this page.
Removable Keypad included, 2 Analogue Inputs, 5 Digital Inputs, 1 Analogue Output, 1 Open Collector, 1 Relay Contact set, Terminals for RS485/Modbus communications, Mini-USB Port.
Input Current: 6.8A.
Input Voltage: 380-480V Three Phase +10% -15% at 50-60Hz ±5%
EMC Compliance: IEC 61800-3 Second Environment C3 (Industrial).
SIL3 Included, SIL3, Cat 4
Cubicle mount.
Rated 45°C Ambient.
Ventilation space above and below: 125mm, at sides: 0mm, in front: [not specified].
Heat Loss at max output: 99W.
Mounting via 35mm DIN rail or 4 x 4.5mm diameter holes at rear on 66mm x 196mm centres.
Manufacturer part number is EFC5610-2K20-3P4-MDA-7P-NNNNN-L1NN; R912007275
Replaces the IndraDrive Fc where the application permits.