ABB Drives ACS 800 AC Direct Torque Control (DTC) Frequency Inverter with Keypad for 7.5kW (10HP) 400V 3 Ph motor to 13A at High Overload or 11kW (15HP) to 18A when Fan/Pump rated. Simple to set-up with 400V three phase input for a standard AC Induction motor.
R3 Size - 173mm Wide x 265mm Deep x 471mm high.
IP21 Enclosure Protection Rating.
Light Overload Use - 110% x 60seconds every 5 minutes at 18A, 11kW.
Heavy Duty Use - 150% x 60 seconds every 5 minutes at 13A, 7.5kW.
Speed Control Range - 0/300Hz.
Braking - To 22 Ohm Minimum external resistor (not supplied) - see the Resistor options linked below or use the 'Which Resistor' button on this page.
Features -
Operator Keypad has a Multilingual Alpha Numeric Display (4 lines x 20 characters). Can be mounted remotely - see order code option 23635 below.
3 x Analogue Inputs, 2 x Analogue Outputs
7 x Digital Inputs, 3 x Digital (Relay) Outputs - maximum continuous current 2A, 24VDC or 115V/230VAC
1 x Reference Voltage Output +/- 10V, 10mA
Auxiliary Power Supply Output: +24VDC, 250mA
Coated Circuit Boards (Option P901).
EMC Filters None.
Nominal Input Current - 17A.
Input Voltage - 380 to 500V three phase +-10% at 50/60Hz.
Wall mount in clean environment or cubicle mount.
Rated at 40C Ambient.
Heat Loss at max output - 340W.
Full part number is - ACS800-01-0016-5+P901
Package Dimensions : 430mm x 500mm x 270mm (16kg)
Download the ABB ACS800 Catalogue from the link below:-