ABB Drives ACS 800 AC Direct Torque Control (DTC) Frequency Inverter with Keypad 1.5kW (2HP) 400V 3 Ph motor control to 4.7A at Light Overload Use. Simple to set-up with 400V three phase input for a standard AC Induction motor.
R2 Size: 165mm Wide x 226mm Deep x 405mm high.
Enclosure Protection Rating: IP21.
Light Overload Use: 110% x 60seconds every 5 minutes at 4.7A, 1.5kW.
Heavy Duty Use: 150% x 60 seconds every 5 minutes at 3.4A, 1.1kW.
Speed Control Range: 0/300Hz.
Braking: To 44 Ohm Minimum external resistor (not supplied) - see the Resistor options linked below or use the 'Which Resistor' button on this page.
Features:-
Operator Keypad has a Multilingual Alpha Numeric Display (4 lines x 20 characters). Can be mounted remotely - see order code option 23635 below.
3 x Analogue Inputs, 2 x Analogue Outputs
7 x Digital Inputs, 3 x Digital (Relay) Outputs - maximum continuous current 2A, 24VDC or 115V/230VAC
1 x Reference Voltage Output +/- 10V, 10mA
Auxiliary Power Supply Output: +24VDC, 250mA
Coated Circuit Boards (Option P901).
EMC Filters to EN61800-3 to the 2nd Environment C3 Industrial, Grounded Network (TN) - Option +E200.
Nominal Input Current: 5.1A.
Input Voltage: 380 to 415V three phase +-10% at 50/60Hz.
Wall mount in clean environment or cubicle mount.
Ambient: Rated at 40C.
Heat Loss at max output: 100W.
Part number: ACS800-01-0003-3 + E200 + P901
Download the ABB ACS800 technical Manual and Application Guide from the links below:-